Search found 10 matches

by Antonios
Thu May 30, 2019 4:23 pm
Forum: Programming - API
Topic: GMX 200 weather station
Replies: 1
Views: 2518

GMX 200 weather station

Hello Guys, I have followed the example provided at http://www.libelium.com/development/plug-sense/examples/ag-xtr-15-gmx240-sensor-reading/ for my gmx 200 weather station. However i observe that the outputs as not the same as in the example as for the timestamp i am getting the readings for the vol...
by Antonios
Wed May 22, 2019 11:44 am
Forum: Programming - API
Topic: Gas sensors example code
Replies: 3
Views: 3435

Re: Gas sensors example code

Hello and thanks for the reply. The sensors are using P&S Smart Cities PRO, how you can tell that the readings taken from the sensors are ok since all the examples have a similar "gas concentration" ? so if we change the values accordingly e/g/ O3, CO2 etc. the code can be the same in all cases? Tha...
by Antonios
Fri May 17, 2019 1:06 pm
Forum: Programming - API
Topic: Gas sensors example code
Replies: 3
Views: 3435

Gas sensors example code

Hello guys, Could you please help me with my gas sensors. I bought a Carbon dioxide (CO2), A Nitric dioxide (NO2) and an Ozone (O3) gas sensor. Is this an example code to program all my sensors? CO2 is not included unless there is a typo.. http://www.libelium.com/development/waspmote/examples/scp-v3...
by Antonios
Mon Nov 07, 2016 6:13 pm
Forum: Networking 802.15.4 / LoRaWAN / Sigfox / WIFI / GPRS / 3G / 4G...
Topic: communication between LoRa P&S and LoRa gateway
Replies: 7
Views: 4005

Re: communication between LoRa P&S and LoRa gateway

Hello again, Thank you for once more for your advice. I have followed your instructions to the letter and on the example you gave me SX 05a: TX Frame I get this response from my P&S. E# SX_05a example Semtech SX1272 module. TX LoRa with Waspmote Frame ---------------------------------------- Setting...
by Antonios
Mon Nov 07, 2016 3:52 pm
Forum: Networking 802.15.4 / LoRaWAN / Sigfox / WIFI / GPRS / 3G / 4G...
Topic: communication between LoRa P&S and LoRa gateway
Replies: 7
Views: 4005

Re: communication between LoRa P&S and LoRa gateway

Hello, Thank you very much for your guidance. I have managed to “factory reset” my gateway. Now could you please tell me how to make my P&S communicate and send the code I got to (the readings from the sensors) to the LoRa gateway? Any example or a step by step guidance would be really appreciated. ...
by Antonios
Thu Nov 03, 2016 12:16 pm
Forum: Networking 802.15.4 / LoRaWAN / Sigfox / WIFI / GPRS / 3G / 4G...
Topic: communication between LoRa P&S and LoRa gateway
Replies: 7
Views: 4005

Re: communication between LoRa P&S and LoRa gateway

Hello, Thank you very much for your response, I have followed your example and I have downloaded cutecom in order to try to set up the LoRa communication module inside my P&S smart agriculture. I managed to follow up to the - Module setup instructions (4.1 – Read current setup of the module) and my ...
by Antonios
Wed Nov 02, 2016 6:29 pm
Forum: Networking 802.15.4 / LoRaWAN / Sigfox / WIFI / GPRS / 3G / 4G...
Topic: communication between LoRa P&S and LoRa gateway
Replies: 7
Views: 4005

communication between LoRa P&S and LoRa gateway

Hello Guys, I would be very thankful if you could provide me some help in order to configure my LoRa gateway. I have a smart agriculture P&S with a LoRa communication module. I need to send the data generated from the sensors of my P&S to my LoRa gateway (communication module on a USB board). I have...
by Antonios
Wed Oct 26, 2016 2:52 pm
Forum: Waspmote Plug & Sense! [Encapsulated Line]
Topic: code needed for the sensor - PAR (SQ-110)
Replies: 1
Views: 1999

code needed for the sensor - PAR (SQ-110)

Hello guys,

I am not an experienced developer, I have the radiation sensor - PAR (SQ-110) and I am searching for the code in order to receive the readings from my sensor.
Could you please help me with the code?

Many thanks,
Antonio
by Antonios
Wed Feb 10, 2016 6:14 pm
Forum: Programming - API
Topic: help with code for an RFID application with xbee868
Replies: 3
Views: 2525

Re: help with code for an RFID application with xbee868

Thank you so much that was really helpful, as well as your quick response which is mostly
appreciated! : )

Many thanks,
Antonio
by Antonios
Wed Feb 10, 2016 12:08 pm
Forum: Programming - API
Topic: help with code for an RFID application with xbee868
Replies: 3
Views: 2525

help with code for an RFID application with xbee868

Hello guys,

I am really new to programming and I could not consider myself as a developer at all. I need help with a code example which I could apply for an RFID application using 868MHz.
Any help would be mostly appreciated.

Many thanks,
Antonio