Search found 5 matches

by skalra90
Thu Apr 03, 2014 2:15 pm
Forum: 6LoWPAN / IPv6
Topic: Connecting motes
Replies: 6
Views: 11011

Re: Connecting motes

Did you got this running on physical motes? I was able to do it on simulated but again I need it to configure ethernet before using that and I cannot do that http://www.libelium.com/forum/viewtopic ... 35&t=12747.
by skalra90
Thu Apr 03, 2014 2:13 pm
Forum: Mote Runner
Topic: Problem using wlip on physical motes
Replies: 2
Views: 5876

Re: Problem using wlip on physical motes

I am having the same issues. Even if you don't use this way and use moma-load wlip-gateway , it will load the wlip gateway without any error but if you use any wlip command like wlip-config or any other it says that it is not a gateway. I am also bummed setting up my motes using ethernet or radio bu...
by skalra90
Mon Mar 31, 2014 4:05 pm
Forum: 6LoWPAN / IPv6
Topic: Connecting motes
Replies: 6
Views: 11011

Re: Connecting motes

I tried what you said. But I couldn't get the tunnel run. when I run sudo ./tunnel --sonoran It gets stuck and never give me configuration. I have been doing a lot of things to get me through to connect to waspmotes wirelessly. Can you give me the sequence of tutorials you followed. Its been a long ...
by skalra90
Mon Mar 24, 2014 1:46 pm
Forum: 6LoWPAN / IPv6
Topic: Connecting motes
Replies: 6
Views: 11011

Re: Connecting motes

How did you do this? I am not even able to get all this. Please explain. Thanks. I'm following the Reply example on the SDK to create the network, by setting up a Tunnel and a network interface between the PC and the edge mote. After that, I'm creating 2 motes and downloading the mrv6-edge assembly ...
by skalra90
Mon Mar 24, 2014 1:44 pm
Forum: Mote Runner
Topic: Does waspmote supports device management?
Replies: 0
Views: 3950

Does waspmote supports device management?

I have Waspmote Moterunner kit and I am planning to use openHAB(https://github.com/openhab/openhab) with it, Can I manage sensors state (ON/OFF), Sleep cycles etc.? I am new to this, any help will be appreciated.