Search found 116 matches

by MaticS
Mon Dec 16, 2019 10:26 pm
Forum: Waspmote Plug & Sense! [Encapsulated Line]
Topic: SensorAgrv20.sleepAgr(...) problem
Replies: 1
Views: 2400

SensorAgrv20.sleepAgr(...) problem

Hi, we have a v12 Plug&Sense node that was fixed (serviced) a while ago, but it used to work well for the last couple of months. However, now we notice a strange functiion of SensorAgrv20.sleepAgr(...) function call: (1) the node seems to only sleep for around a second, then executes the code onward...
by MaticS
Tue Jul 16, 2019 3:23 pm
Forum: Waspmote Plug & Sense! [Encapsulated Line]
Topic: XBee900HP: unicast issue, but only in Australia
Replies: 18
Views: 10601

Re: XBee900HP: unicast issue, but only in Australia

Neverming - we see it is on top in Meshlium settings. :) Cheers.
by MaticS
Tue Jul 16, 2019 3:18 pm
Forum: Waspmote Plug & Sense! [Encapsulated Line]
Topic: XBee900HP: unicast issue, but only in Australia
Replies: 18
Views: 10601

Re: XBee900HP: unicast issue, but only in Australia

Hi, just a quick check: do we need to set just the channelMask with: xbee900HP.setChannelMask( channelMask ); or also PanID and PreambleID? Where in Meshlium can we see or set the PanID and PreambleID setting? Are they hard-coded or can they be read and set in Meshlium? Under the module info, we jus...
by MaticS
Mon Jul 15, 2019 2:41 pm
Forum: Waspmote Plug & Sense! [Encapsulated Line]
Topic: XBee900HP: unicast issue, but only in Australia
Replies: 18
Views: 10601

Re: XBee900HP: unicast issue, but only in Australia

Hi Libelium, as of the channels, Meshlium actually only gives the ability to select channels between 33 and 63. There is no user interface to select any other channel. All of those channels, including 33 and 63, are selected. As of the code you linked in the last post: we did never run this code to ...
by MaticS
Mon Jul 15, 2019 1:19 pm
Forum: Waspmote Plug & Sense! [Encapsulated Line]
Topic: XBee900HP: unicast issue, but only in Australia
Replies: 18
Views: 10601

Re: XBee900HP: unicast issue, but only in Australia

Hi Libelium, thank you for the information. Configuring the channels on Meshlium will be the next step, I will let you know the results.

As of the other on-field tests, we have a hard time to perform them because the devices are already installed physically outside.

BR Matic
by MaticS
Mon Jul 15, 2019 11:21 am
Forum: Waspmote Plug & Sense! [Encapsulated Line]
Topic: XBee900HP: unicast issue, but only in Australia
Replies: 18
Views: 10601

Re: XBee900HP: unicast issue, but only in Australia

I just sent them over the RMA form.
by MaticS
Thu Jul 11, 2019 5:58 pm
Forum: Waspmote Plug & Sense! [Encapsulated Line]
Topic: XBee900HP: unicast issue, but only in Australia
Replies: 18
Views: 10601

Re: XBee900HP: unicast issue, but only in Australia

Hi Libelium, we have obtained the serial IDs. May I send them to you via e-mail or private message?
by MaticS
Tue Jun 18, 2019 9:11 am
Forum: Waspmote Plug & Sense! [Encapsulated Line]
Topic: XBee900HP: unicast issue, but only in Australia
Replies: 18
Views: 10601

Re: XBee900HP: unicast issue, but only in Australia

Also, the Waspmotes (Plug&Sense-s) were purchased in Australia, so they should be Australia version.
by MaticS
Tue Jun 18, 2019 9:08 am
Forum: Waspmote Plug & Sense! [Encapsulated Line]
Topic: XBee900HP: unicast issue, but only in Australia
Replies: 18
Views: 10601

Re: XBee900HP: unicast issue, but only in Australia

Hi there, sorry about the delay with answering. We managed to read the configuration and the MAC address is OK. The rest of the configuration can be seen here: https://i.ibb.co/TcwfQWM/Screenshot-from-2019-06-18-03-41-05.png We still need to use broadcast as a MAC for the Meshlium to catch the frame...
by MaticS
Wed Jun 12, 2019 3:13 pm
Forum: Waspmote Plug & Sense! [Encapsulated Line]
Topic: readPluviometerCurrent() question / too small rainfall values
Replies: 16
Views: 6506

Re: readPluviometerCurrent() question / too small rainfall values

Hi, I would like to update on that topic. We found out that with one of the nodes, there was actually no problem with reading the WS-3000. So the following still holds true: Node1 + WS3000-1 = no problmes Node2 + WS3000-2 = problems Node1 + WS3000-2 = problems Node2 + WS3000-1 = no problems Which le...