Search found 19854 matches

by libelium-dev
Mon Aug 02, 2010 4:30 pm
Forum: General Questions
Topic: Receiving sensor data frames in Meshlium Java version
Replies: 4
Views: 6859

Re: Receiving sensor data frames in Meshlium Java version

Really nice application Carmine.

Thank you very much for sharing with the community your code.

Best regards.
by libelium-dev
Thu Jul 22, 2010 10:34 am
Forum: General Questions
Topic: Meshlium High Power vd Low Power
Replies: 1
Views: 3614

Re: Meshlium High Power vd Low Power

1) Why would this depend on the antenna if you are supposed to supply the antenna shipped with the Meshlium? High power radios on Meshlium has a different antenna and a different card than low power radio. Power transmission and antenna gain are higher for high power radio of Meshlium. 2) How does ...
by libelium-dev
Fri Jul 16, 2010 8:14 am
Forum: General Questions
Topic: maximum Network
Replies: 3
Views: 4707

Re: maximum Network

Hi,

There is no limit in the number of Routers associated to a Coordinator.

Regards
by libelium-dev
Thu Jul 15, 2010 1:45 pm
Forum: General Questions
Topic: maximum Network
Replies: 3
Views: 4707

Re: maximum Network

Hi,

Routers may have up to 12 End Devices.

Coordinators may have up to 10 End Devices.

Regards
by libelium-dev
Mon Jul 12, 2010 10:46 am
Forum: General Questions
Topic: could I transfer data from Meshlium to Waspmote?
Replies: 4
Views: 5861

Re: could I transfer data from Meshlium to Waspmote?

Hi, If Waspmote is sleeping, you can send the data but Waspmote won't be able to store or process it. If you are in sleep mode, you have to enable the GPRS interruptions using the function enableInterrupts(UART1_INT); Once you receive a call or a SMS, Waspmote will wake up and you'll have to check t...
by libelium-dev
Mon Jul 12, 2010 8:50 am
Forum: General Questions
Topic: could I transfer data from Meshlium to Waspmote?
Replies: 4
Views: 5861

Re: could I transfer data from Meshlium to Waspmote?

Hi, 1- You can send data from Meshlium to Waspmote using the XBee or the GPRS module. 2- As I've told you, there are two ways of sending data to Waspmote: XBee and GPRS. However, the XBee is not capable of waking Waspmote up. GPRS is able to wake Waspmote up, though GPRS power consumption is very hi...
by libelium-dev
Thu Jul 08, 2010 8:58 am
Forum: General Questions
Topic: Boot time
Replies: 1
Views: 3682

Re: Boot time

You can disable services you don't need on Meshlium. For example postgree, or MySQL. Please be carefull when deactivating services on Meshlium. The lowest aggresive way is to remove execution perms on /etc/init.d/ to the init scripts of the services. Please be sure not removing execution to services...
by libelium-dev
Thu Jul 08, 2010 8:52 am
Forum: General Questions
Topic: Range problems
Replies: 7
Views: 8010

Re: Range problems

POE provides the voltage and amperage that Meshlium needs.

Please don't modiy POE, that can cause a complete failure on Meshlium.
by libelium-dev
Tue Jul 06, 2010 5:00 pm
Forum: General Questions
Topic: Antenna connections
Replies: 5
Views: 6436

Re: Antenna connections

Our technical department will check with you the problem in order to find a solution.

Best regard.
by libelium-dev
Tue Jul 06, 2010 2:16 pm
Forum: General Questions
Topic: Range problems
Replies: 7
Views: 8010

Re: Range problems

dmesg output seems right, please fill a technical request on

http://www.libelium.com/support/technicalservice

so our technical staff will contact you as soon as possible.

Best regards.