Search found 19854 matches

by libelium-dev
Tue Jul 06, 2010 12:11 pm
Forum: General Questions
Topic: Range problems
Replies: 7
Views: 8034

Re: Range problems

Long range link will modify acktimeout, slottime and ctstimeout values. So changing those values will not have any influence on signal power. Auto value for power should be the best choice. 19db is the highest value you can select. Can you provide us the output of executing on a ssh session on meshl...
by libelium-dev
Tue Jul 06, 2010 12:07 pm
Forum: General Questions
Topic: Antenna connections
Replies: 5
Views: 6468

Re: Antenna connections

If you look to the picture of Meshlium in page

http://www.libelium.com/products/meshlium

Top left antenna is 2.4GHz top right antenna is 5Ghz

5Ghz should not affect 2.4Ghz transmission.

Best regards
by libelium-dev
Tue Jul 06, 2010 12:03 pm
Forum: General Questions
Topic: RSSI
Replies: 1
Views: 3613

Re: RSSI

Right now there is not a plugin for RSSI monitorization.
by libelium-dev
Mon Jul 05, 2010 9:58 am
Forum: General Questions
Topic: Range problems
Replies: 7
Views: 8034

Re: Range problems

Solid walls modify ranges for 2.4Ghz and 5Ghz links, but you should get better range. Are you sure your Meshlium has a 2.4Ghz High power radio?

You can fill a technical report on our website

http://www.libelium.com/support/technicalservice
by libelium-dev
Mon Jul 05, 2010 9:58 am
Forum: General Questions
Topic: Antenna connections
Replies: 5
Views: 6468

Re: Antenna connections

Top left = 2.4GHz, Top right = 5GHz

Thats right, if you don't know about other connections (bottom-left/right), tell us right here in the forum, we will know answer you.

Best regards
by libelium-dev
Mon Jul 05, 2010 9:53 am
Forum: General Questions
Topic: Configured Meshlium as a Host
Replies: 5
Views: 6475

Re: Configured Meshlium as a Host

If you have a static IP on your GPRS connection you should be able to access Meshlium using that IP. The static IP should be provided by your mobile operator and will be attached to the SIM installed in Meshlium. Using LAN, connection your Meslium will be on your LAN and the Internet access will be ...
by libelium-dev
Mon Jun 28, 2010 6:31 pm
Forum: General Questions
Topic: Configured Meshlium as a Host
Replies: 5
Views: 6475

Re: Configured Meshlium as a Host

hello emilio0401 again,

Remember, if you choose to install openvpn, meshlium works with a Debian based OS, so you can install this via APT.


Regards,
by libelium-dev
Mon Jun 28, 2010 6:23 pm
Forum: General Questions
Topic: Configured Meshlium as a Host
Replies: 5
Views: 6475

Re: Configured Meshlium as a Host

Hello emilio0401, If you have a Static IP, you don't need something like DynDNS, no-ip, or similar web service. You only need set you ADSL-Router, opening a port for your meshlium. Otherwise, if you have a dynamic IP, the vest option is sign up in once of previous services (DynDNS, no-ip, ...), and ...
by libelium-dev
Thu May 27, 2010 10:22 am
Forum: General Questions
Topic: No Zigbee channel
Replies: 5
Views: 6953

Re: No Zigbee channel

Meshlium can be configured as a Coordinator, router or end device. You should check the type of Xbee firmware you asked for when you buy meshlium. If you should have received a coordinator please open a RMA report on http://www.libelium.com/support/technicalservice And expose the problem. Best regar...
by libelium-dev
Thu May 27, 2010 8:20 am
Forum: General Questions
Topic: No Zigbee channel
Replies: 5
Views: 6953

Re: No Zigbee channel

Hi, If it returns '0' when answering the channel it is because it hasn't associated to any network. The firmware version '2221' corresponds to 'Router' so if you don't have a 'Coordinator' enabled in the network it won't have a channel. If you see the channel changing from '0' to 'C' it is because i...