[News] Code generator updated to v02.

Post Reply
libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

[News] Code generator updated to v02.

Post by libelium-dev » Mon Oct 28, 2013 11:21 am

Dear all,

The code generator has been updated to version V02.

Check it here: http://www.libelium.com/development/was ... _generator

The main difference is that now generated codes are compatible with last Waspmote IDE and API version, so the specific Plug & Sense! IDE is no longer needed (the green one).


Best Regards.

ann_chan
Posts: 13
Joined: Mon Oct 27, 2014 6:46 pm

Re: [News] Code generator updated to v02.

Post by ann_chan » Tue Oct 28, 2014 4:26 pm

Hi,

I want to program a Smart Water with a temperature and conductivity Sensors, but on code generator, Smart Water dosen't appears. How can I progam it?

Thanks

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: [News] Code generator updated to v02.

Post by libelium-dev » Wed Oct 29, 2014 10:24 am

Hi,

The code generator is still not updated with latest releases. In the meantime, you can use the examples for the smart water board.

http://www.libelium.com/development/was ... mart-water

edison
Posts: 2
Joined: Thu Dec 10, 2015 6:43 am

Re: [News] Code generator updated to v02.

Post by edison » Mon Feb 15, 2016 10:01 am

libelium-dev wrote:Dear all,

The code generator has been updated to version V02.

Check it here: http://www.libelium.com/development/was ... _generator

The main difference is that now generated codes are compatible with last Waspmote IDE and API version, so the specific Plug & Sense! IDE is no longer needed (the green one).


Best Regards.
Couldn't find Environment Pro generator in the selection. is it also in the roadmap?

Btw, I only used waspmote line before, planning to get a plug & sense version, are the code interchangable between Waspmote line and P&S line for the same board?

Thank you

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: [News] Code generator updated to v02.

Post by libelium-dev » Mon Feb 15, 2016 2:04 pm

Sorry but code generator for Enviroment PRO is not available and is not expected that code generator i s going to be updated soon.By the way we have a big amount of examples about the Gases PRO board that could be useful to you.

The codes from waspmote to P&S are interchangable just with minimal changes.

Regards.

edison
Posts: 2
Joined: Thu Dec 10, 2015 6:43 am

Re: [News] Code generator updated to v02.

Post by edison » Thu Feb 18, 2016 5:13 am

I have setup a Waspmote Gas Pro to communicate with Waspmote Gateway LoRa (WGLoRa-SMA4-900).
If I buy another Plug&Sense version Environment Pro, is it technically possible to connect this plug&sense to the waspmote gateway too? or plug&sense only works with meshlium?

Thank you

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: [News] Code generator updated to v02.

Post by libelium-dev » Thu Feb 18, 2016 8:33 am

Yes, it is possible edison. Just is necessary that they communicate with the same RF module.

Regards.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest