which API Version and IDE for Waspmote V1.2 ?

Everything about programming the platform and using the Waspmote API
Post Reply
Shakey7
Posts: 33
Joined: Mon Jan 26, 2015 6:32 pm

which API Version and IDE for Waspmote V1.2 ?

Post by Shakey7 » Fri Feb 01, 2019 11:47 pm

Hi LIbelium Team

I have to get back to old waspmotes and plug&Sense V1.2 material, so I want to know which IDE and API version can I use for programming Meshlium Smart City (not pro) and waspmote v1.2 with sensor end gas board.
On Libelium website in old Development Section, the latest versions available are IDE V04 and API V023.

Can use IDE V05 and with which latest API ?

Thanks

Bernie

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: which API Version and IDE for Waspmote V1.2 ?

Post by libelium-dev » Mon Feb 04, 2019 9:28 am

Hi,

The last API compatible with v12 devices is v032. You can download it from here.
http://downloads.libelium.com/waspmote-pro-api-v032.zip

On the other hand, Waspmote Pro IDE - v06 is compatible with v12 devices. You have to replace library folders with the above ones.
http://www.libelium.com/development/was ... lications/

Regards

Shakey7
Posts: 33
Joined: Mon Jan 26, 2015 6:32 pm

Re: which API Version and IDE for Waspmote V1.2 ?

Post by Shakey7 » Tue Feb 05, 2019 4:35 pm

HI Libelium team

Thanks for your quick feedback.
But tell me where do I have to insert waspmote-api folder (from V032) into waspmote IDE V612 folders ?
It's hard to find the procedure to follow in your website.

Have a nice day
Bernie

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: which API Version and IDE for Waspmote V1.2 ?

Post by libelium-dev » Wed Feb 06, 2019 10:48 am

Hi Bernie,

You can find where locate the folders depending of your OS in the following link
http://www.libelium.com/downloads/docum ... pdf#page=3

Hope this helps.
Regards

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest