scan network found no nodes using Digimesh Network

Using OTA functions with Waspmote
nino
Posts: 8
Joined: Thu Apr 14, 2016 12:09 am

Re: scan network found no nodes using Digimesh Network

Post by nino » Fri Nov 04, 2016 1:04 am

Hi,

I've done the format of the SD card with the libelium example code SD12. Then I copied the OTA_01 and OTA_01.hex files from my PC to the SD card.

Execute the otap test, the result is no node found.

I reformat the SD card with the libelium example code SD12 again, but I did not copy the OTA_01 and OTA_01.hex files to the SD card (the SD card is empty).
Then I executed the otap test, the result is no node found.

FYI, when I check the size of the SD card on my windows PC, the size is 1.83GB.

Cheers
Nino

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: scan network found no nodes using Digimesh Network

Post by libelium-dev » Fri Nov 04, 2016 10:13 am

Hi,

SD cards that we use are Transcend brand and it have 2GB. HC cards are not compatible. You can try to purchase this type of SD.

OTA via xbee usually cause problems, it is a complicated process.

Regards

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest