CAN NOT LOAD MAC ADDRESS IN MESHLIUM ZIGBEE 3G AP

How to configure Meshlium or use the Manager System
singh77
Posts: 22
Joined: Sun Mar 24, 2013 11:18 am

Re: CAN NOT LOAD MAC ADDRESS IN MESHLIUM ZIGBEE 3G AP

Post by singh77 » Mon Jun 10, 2013 11:43 am

How to stop stop sensor Parser daemon? and after stopping what to do? I am not able to read the Mac Address?

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: CAN NOT LOAD MAC ADDRESS IN MESHLIUM ZIGBEE 3G AP

Post by libelium-dev » Tue Jun 11, 2013 1:21 pm

Hello singh77

Sorry, the command to stop sensorParser daemon is sensorParserD.sh stop. Try again with this.

Regards

singh77
Posts: 22
Joined: Sun Mar 24, 2013 11:18 am

Re: CAN NOT LOAD MAC ADDRESS IN MESHLIUM ZIGBEE 3G AP

Post by singh77 » Tue Jun 11, 2013 4:26 pm

I can not load mac address and check status from meshlium manager system. Manager system gives unexpected error please try again.
I have tried all the commands you specified in previous posts. Kindly Provide solution. It is just waisting my time.

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: CAN NOT LOAD MAC ADDRESS IN MESHLIUM ZIGBEE 3G AP

Post by libelium-dev » Wed Jun 12, 2013 9:56 am

Hello singh77,

To help you, we need that you follow all step and you tell us and response you get. Repeat. To check if your Xbee module work properly. You must stop all daemons.
ZigbeeScanD.sh stop and sensorParserD.sh stop, after, check If the demons are really stopped, for this execute ps -ae and check that daemons not appear.

After execute:

Code: Select all

capturer S0 38400.
and write "+++", module should return ok.

If not response ok, write again "+++". If response ok, execute the follow command to know the MAC.

Code: Select all

ATSH
ATSL
Regards

singh77
Posts: 22
Joined: Sun Mar 24, 2013 11:18 am

Re: CAN NOT LOAD MAC ADDRESS IN MESHLIUM ZIGBEE 3G AP

Post by singh77 » Wed Jun 12, 2013 10:36 am

When I gives ZigbeeScanD.sh stop it gives me

Code: Select all

rm: cannot remove ' /var/lock/Zigbee Scan D': No such file or directory
zigbeestorer: no process killed
Please reply fast

singh77
Posts: 22
Joined: Sun Mar 24, 2013 11:18 am

Re: CAN NOT LOAD MAC ADDRESS IN MESHLIUM ZIGBEE 3G AP

Post by singh77 » Wed Jun 12, 2013 10:40 am

Continued with previous post............

When I give sensorParserD.sh stop

Reply is

Code: Select all

 sensorParser.sh: no process killed

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: CAN NOT LOAD MAC ADDRESS IN MESHLIUM ZIGBEE 3G AP

Post by libelium-dev » Thu Jun 13, 2013 9:11 am

Hello singh77,

if returns this, it means the process is already stopped. So far so good. What happens when you run, "capturer S0 38400" and commands indicate in last post?

regards

singh77
Posts: 22
Joined: Sun Mar 24, 2013 11:18 am

Re: CAN NOT LOAD MAC ADDRESS IN MESHLIUM ZIGBEE 3G AP

Post by singh77 » Thu Jun 13, 2013 9:40 am

Dear Sir,
I executed above codes and
give
capture S0 38400.
and write "+++", module is not returning ok.

I again gave "+++",
but not receiving OK,
What to do please reply

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: CAN NOT LOAD MAC ADDRESS IN MESHLIUM ZIGBEE 3G AP

Post by libelium-dev » Thu Jun 13, 2013 9:42 am

Hello singh77

And Are the deamons stopped? If it is yes, please contact with tech support in Libelium web page.

Regards

singh77
Posts: 22
Joined: Sun Mar 24, 2013 11:18 am

Re: CAN NOT LOAD MAC ADDRESS IN MESHLIUM ZIGBEE 3G AP

Post by singh77 » Thu Jun 13, 2013 9:57 am

deamons are not stopped with these commands. Tell me another way by which I can stop deamons?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest