New Software Upgrade. Update from 3.2.2 to 3.2.3

How to configure Meshlium or use the Manager System
Post Reply
libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

New Software Upgrade. Update from 3.2.2 to 3.2.3

Post by libelium-dev » Thu Dec 03, 2015 8:38 am

Dear Developer,

We are happy to inform that we have implemented new software versions for our main products.

They are available for free download following the instructions on the links below.

Meshlium Manager System v3.2.3 upgrades:

-We created the cloud connector for 4 new clouds:
-IBM Bluemix
-Microsoft Azure Event Hubs
-DeviceLynk
-B-Scada
-We renewed the WiFi Scan service
-We improved the MQTT service

To update your Meshlium, please follow the steps explained in the chapter "Upgrading old versions of Meshlium" of the Meshlium Technical Guide.

Cheers,

NOTE: Don't reply to this topic. If you have any issue about the update or any other thing, please, start a new thread. Any comment in this topic won't be attended.

--The Libelium R&D Team

fusionadev
Posts: 13
Joined: Mon Aug 24, 2015 6:24 pm

Re: New Software Upgrade. Update from 3.2.2 to 3.2.3

Post by fusionadev » Wed Dec 16, 2015 5:32 pm

Hi, i upgradre Firmware 3.2.3, but lost data from WIFI Scan, the parameters of Database External is ok, in fact chek conection ok, but i dont see any data from wifi scanner, please help

thanks

Vittorio

NicolaMondello
Posts: 69
Joined: Fri Jul 17, 2015 6:07 pm

Re: New Software Upgrade. Update from 3.2.2 to 3.2.3

Post by NicolaMondello » Mon Feb 01, 2016 4:57 pm

Hi, after te update from version 3.2.1 to 3.2.3 my MQTT connector doesn't works.
Also using User and Password into the "Server/Broker Configuration" I don't receive nothing.
My Topic is "Libelium/Sensor_node_01_400574197/BAT" so I think it shouldn't be changed, am I right?
Actually the "Topic template file" is "#MESHLIUM#/#ID_WASP#/#SENSOR#"

NicolaMondello
Posts: 69
Joined: Fri Jul 17, 2015 6:07 pm

Re: New Software Upgrade. Update from 3.2.2 to 3.2.3

Post by NicolaMondello » Wed Feb 10, 2016 12:14 pm

NicolaMondello wrote:Hi, after te update from version 3.2.1 to 3.2.3 my MQTT connector doesn't works.
Also using User and Password into the "Server/Broker Configuration" I don't receive nothing.
My Topic is "Libelium/Sensor_node_01_400574197/BAT" so I think it shouldn't be changed, am I right?
Actually the "Topic template file" is "#MESHLIUM#/#ID_WASP#/#SENSOR#"
Any help?

mariad_10
Posts: 7
Joined: Fri Feb 17, 2017 7:35 am

Re: New Software Upgrade. Update from 3.2.2 to 3.2.3

Post by mariad_10 » Fri Jun 30, 2017 3:18 pm

I am not able to make my MQTT connector work too after i have done the update to 3.2.3

Any help on that would be appreciated.

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: New Software Upgrade. Update from 3.2.2 to 3.2.3

Post by libelium-dev » Thu Jul 06, 2017 11:29 am

Don't reply to this topic. If you have any issue about the update or any other thing, please, start a new thread. Any comment in this topic won't be attended.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests