not sending frames form meshlium to waspmote

How to configure Meshlium or use the Manager System
fede_g
Posts: 25
Joined: Sat Apr 02, 2016 12:05 pm

not sending frames form meshlium to waspmote

Post by fede_g » Thu May 19, 2016 3:00 pm

hi libelium-dev,
i have a meshlium and i wish send a frame, from meshlium to waspmote. i have read your documentation but i don't find the file ZigBeeSend.c
to be compiled or executable file ZigBeeSend.

Regards

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: not sending frames form meshlium to waspmote

Post by libelium-dev » Thu May 19, 2016 6:14 pm

Hi fede_g,

You can find the file in: "/mnt/lib/var/www/ManagerSystem/plugins/b_SensorData/b0_capturer/bin/ZigBeeSend.c"

Best regards,

prasanna3ram
Posts: 5
Joined: Tue Mar 27, 2018 10:53 am
Company: MEDs Technologies

Re: not sending frames form meshlium to waspmote

Post by prasanna3ram » Wed Mar 28, 2018 5:38 am

Hi Libelium,
I wish to send frames from my Meshlium to Waspmote via Zigbee. Similar to the above post, even I couldn't find the ZigBeeSend.c in my folder mentioned. I dont even have the bin folder in the "b0_capturer" folder. I managed to get the code from other posts for the ZigBeeSend.c program, however am not sure how to proceed. Do I have to make new directories inside "b0_capturer" folder and save this file in it( if so, I tried that too, it's not allowing me to do that, stating that b0_capturer is in read only permission), or save it some where else and call the command ZigBeeSend directly.
Also, I couldn't find any ZigBeeScanD.sh file in the init.d folder.

Kindly share your inputs on the above. Thanks

Regards,
Prasanna

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: not sending frames form meshlium to waspmote

Post by libelium-dev » Wed Mar 28, 2018 12:40 pm

Hi Prasanna,

Do you have a Meshlium with Zigbee module? Meshlium 4 doesn't include Zigbee module. It can have Xbee 802, 868 or 900.

The above post is for a Meshlium 3, so your device is complete different.

Regards

prasanna3ram
Posts: 5
Joined: Tue Mar 27, 2018 10:53 am
Company: MEDs Technologies

Re: not sending frames form meshlium to waspmote

Post by prasanna3ram » Thu Mar 29, 2018 4:23 am

Hi Dev,
Thanks for the clarification, I am using Meshlium 4G 802.15.4 AP BR. In that case can I send frames/data from my Meshlium to Waspmote via Xbee 802? If so, kindly let me know the procedure for the same. Thanks

Regards

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: not sending frames form meshlium to waspmote

Post by libelium-dev » Mon Apr 02, 2018 11:53 am

Hi,

Yes, you can send data from Waspmote + XBee802 module to your Meshlium. You can use the example code to configure the node with the same channels and panid that Meshlium and then use the example code to send data.
http://www.libelium.com/development/was ... t=802-15-4

Also please take a look at this tutorial to know more information.
http://www.libelium.com/development/was ... -tutorial/

Regards

prasanna3ram
Posts: 5
Joined: Tue Mar 27, 2018 10:53 am
Company: MEDs Technologies

Re: not sending frames form meshlium to waspmote

Post by prasanna3ram » Tue Apr 03, 2018 3:19 am

Hi Dev,
Thanks for your reply. But, am trying to do it, the other way round. I want to send data from Meshlium to Waspmote via xbee 802.15.4. Kindly let me know the procedures for the same.

Regards

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: not sending frames form meshlium to waspmote

Post by libelium-dev » Tue Apr 03, 2018 9:26 am

Hi,

We are sorry but it isn't possible send data from Meshlium to Waspmote. We didn't develop that feature.

Regards

prasanna3ram
Posts: 5
Joined: Tue Mar 27, 2018 10:53 am
Company: MEDs Technologies

Re: not sending frames form meshlium to waspmote

Post by prasanna3ram » Tue Apr 10, 2018 3:55 am

Hi,
In that case, can I run a program using python inside Meshlium to send data from Meshlium to Waspmote over xbee? And,I am trying access the xbee module inside the Meshlium through SST. I stopped the sensorParserD.sh and I managed to read the data sent from Waspmote to Meshlium in my terminal window. I am reading the values through the serial Port /dev/ttyS1 and Baudrate of 115200. However, when am trying to send basic AT commands through the same serial port, am receiving any response. Kindly help me understand why am not able get any response from the Xbee module when executing basic AT commands in the Meshlium?

Regards

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: not sending frames form meshlium to waspmote

Post by libelium-dev » Tue Apr 10, 2018 9:43 am

Hi,

What command did you send? Did you send the command +++ (without line end) to enter in at commands mode?

Regards

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 3 guests