Data stored by waspmote

How to configure Meshlium or use the Manager System
Post Reply
isa_uma
Posts: 12
Joined: Wed Oct 18, 2017 11:11 am
Company: UNIV. DE MALAGA

Data stored by waspmote

Post by isa_uma » Thu Apr 26, 2018 10:30 am

Good Morning People from Libelium!

I am working on a proyect using several wireless sensors, and I was wondering if it is possible that one of these sensor, store the data in the SD disk (waspmote) and once this node is within the range of Meslium, transfer this data via wifi to an external database.

So, Is it possible this configuration ? In case it is, how can I manage to tranfer the data stored in the waspmote to the exteranl database ?

Thank you in advanced.

Regards.

isa_uma
Posts: 12
Joined: Wed Oct 18, 2017 11:11 am
Company: UNIV. DE MALAGA

Re: Data stored by waspmote

Post by isa_uma » Thu Apr 26, 2018 10:47 am

This is the idea: I want to configure Meshlium as a mobile node, so when the wireless sensor is within the range of Meshlium, send the data stored by waspmote via Zig-Bee (not wifi as I said) to a external database.
Thank you

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Data stored by waspmote

Post by libelium-dev » Fri Apr 27, 2018 8:49 am

Hi,

You can frind how to save datainto SD and then data from SD in the following example code. You can use it as starting point to develop your code
http://www.libelium.com/development/was ... atalogger/

In addition, take a look at the radio documentation to know more formation abut protocol you want to use.
http://www.libelium.com/development/was ... networking

Regards

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 5 guests