Meshlium 3-Sensor and Frame log empty in Manager System

Development questions: create new plugins, add new features...
FIU Grad
Posts: 81
Joined: Wed Nov 16, 2016 10:37 pm

Meshlium 3-Sensor and Frame log empty in Manager System

Post by FIU Grad » Sat Jan 12, 2019 8:44 pm

Can you tell me why my sensor and frame log in the meshlium 3 manager system is empty or blank?
https://drive.google.com/open?id=1v4x1d ... -SBpra7FRp

I did check the local database and I have all the data however.
https://drive.google.com/open?id=1joPHr ... rK4Zs_sqy3

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Meshlium 3-Sensor and Frame log empty in Manager System

Post by libelium-dev » Mon Jan 14, 2019 10:03 am

Hi,

What is the manager system version?

Did you try to send data to Meshlium while you visualize the log?

Regards

FIU Grad
Posts: 81
Joined: Wed Nov 16, 2016 10:37 pm

Re: Meshlium 3-Sensor and Frame log empty in Manager System

Post by FIU Grad » Mon Jan 14, 2019 5:19 pm

Meshlium Manager System v.3.2.7
Serial number: 99001000702329

No I have not try to send data to meshlium yet

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Meshlium 3-Sensor and Frame log empty in Manager System

Post by libelium-dev » Tue Jan 15, 2019 10:27 am

Hi,

So please try to send data to Meshlium to see data in the log.

Regards

FIU Grad
Posts: 81
Joined: Wed Nov 16, 2016 10:37 pm

Re: Meshlium 3-Sensor and Frame log empty in Manager System

Post by FIU Grad » Mon Feb 04, 2019 7:43 pm

Hello,

Its been a while but I am successfully sending data from one of my waspmote and I still don't see anything.

https://drive.google.com/open?id=18HIj4 ... -Pk4xloCsl

What is the problem ?

Thanks in advance,

FIU Grad
Posts: 81
Joined: Wed Nov 16, 2016 10:37 pm

Re: Meshlium 3-Sensor and Frame log empty in Manager System

Post by FIU Grad » Tue Feb 05, 2019 12:34 am

I tried to trouble shoot with sensorParser stop and start to no luck.
I tried to execute the

Code: Select all

 sensorParserD.sh stop
and then trying to run the

Code: Select all

sensorParserD.Sh start
back . This is what I am getting after executing last code: https://drive.google.com/file/d/1s-Wyer ... sp=sharing

Any thought?

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Meshlium 3-Sensor and Frame log empty in Manager System

Post by libelium-dev » Wed Feb 06, 2019 1:04 pm

Hi,

Please go to the following paths and check if there is data in the files. These files save the content that is showed in Logs tab.
/mnt/user/logs/sensor.log
/mnt/user/logs/frame.log

Also, run the "df -h" command and copy here the result.

Regards

FIU Grad
Posts: 81
Joined: Wed Nov 16, 2016 10:37 pm

Re: Meshlium 3-Sensor and Frame log empty in Manager System

Post by FIU Grad » Wed Feb 06, 2019 10:52 pm

When running the two codes suggested I am running into problem. It keeps saying no such file/directory exit.

Code: Select all

meshlium_6964:~# /mnt/user/logs/sensor.log
-bash: /mnt/user/logs/sensor.log: No such file or directory
meshlium_6964:~# /mnt/user/logs/frame.log
-bash: /mnt/user/logs/frame.log: No such file or directory
meshlium_6964:~# tail -f /mnt/user/logs/sensorParser.log
tail: cannot open `/mnt/user/logs/sensorParser.log' for reading: No such file or directory
tail: no files remaining
Running the 'df-h' command ;

Code: Select all

meshlium_6964:~# df -h
Filesystem            Size  Used Avail Use% Mounted on
rootfs                1.5G  1.1G  360M  75% /
udev                   10M  2.6M  7.5M  26% /dev
/dev/disk/by-label/ROOT_FS
                      1.5G  1.1G  360M  75% /
tmpfs                 125M  125M     0 100% /lib/init/rw
varrun                125M   76K  125M   1% /var/run
varlock               125M  4.0K  125M   1% /var/lock
tmpfs                 125M  4.0K  125M   1% /dev/shm
/dev/hda3             4.9G  279M  4.4G   6% /mnt/user
tmpfs                 125M  952K  125M   1% /tmp
tmpfs                 125M  125M     0 100% /var/log
tmpfs                 125M  125M     0 100% /var/tmp
/dev/mapper/lib       887M   43M  800M   5% /mnt/lib
The problem persist when I do

Code: Select all

 sensorParserD.sh stop  sensorParserD.sh start 
the output goes into a never ending loop of looking for the /mnt/user/logs/sensorParser.log files. https://drive.google.com/file/d/1s-Wyer ... sp=sharing

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Meshlium 3-Sensor and Frame log empty in Manager System

Post by libelium-dev » Fri Feb 08, 2019 2:31 pm

Hi,

It is weird that these files don't exist. Please go to the directory using cd /mnt/user/logs command and run ls command to show the files inside the directory. If then don't exist please create them.

Also restart Meshlium to deleted the temporary files since its storage is full.

Regards

FIU Grad
Posts: 81
Joined: Wed Nov 16, 2016 10:37 pm

Re: Meshlium 3-Sensor and Frame log empty in Manager System

Post by FIU Grad » Mon Feb 11, 2019 11:40 pm

It says no such file or directory.
Can you add a detail step on to how to create it ?
I also restarted the meshlium but no change.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest