Waspmote Reset without finish program

Questions about the Waspmote v15 and its modules
Post Reply
jotabeles
Posts: 30
Joined: Thu Mar 09, 2017 1:07 am

Waspmote Reset without finish program

Post by jotabeles » Thu Oct 05, 2017 2:01 am

Dear,
I have a waspmote v1.5, SmartWater 3.0, GPRS SIM 928A.
I am using this combination on a monitorin station that i have already install that on a process, I have a program to send the information of the monitoring throught the GPRS to my own server. But some time ago i have notice a problem with the station, it restart the program before of time, normaly before to start the GPRS module, and don't send anything to my server, it is a big problem because i can't connect the station to my server, after some reset the waspmote start the GPRS card, but some times it takes a lot of time, and my station lose their batery, it happen also when the battery is over 90%, i have to connect the station to electricity line. So i don't know what to do, because it is so weird.
I also probe the program of example of GPRS SIM 928A, example GPRS_SIM928a_19a. and is the same problem.

There is a screenshot of the monitor serial with my program.
https://drive.google.com/file/d/0B0DTPJ ... sp=sharing

Thanks.

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Waspmote Reset without finish program

Post by libelium-dev » Thu Oct 05, 2017 9:01 am

Hi,

What code and API are you using? In this way, we will debug if there is any bug in the libraries.

Could you please also share with us some detail images of your devices?

Regards

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest