LEVEL MEASUREMENT FOR SENSOR MB7389

Questions about the Waspmote v15 and its modules
Post Reply
jotabeles
Posts: 30
Joined: Thu Mar 09, 2017 1:07 am

LEVEL MEASUREMENT FOR SENSOR MB7389

Post by jotabeles » Thu Mar 08, 2018 10:20 pm

Hi, I would like to measure the level of a river, with the following characteristics:

The characteristics of the river flow measured are:
Flow: 28,30 m3/s
First measurement:
Distance between the sensor and the river: 3.8m
Second measurement:
Distance between the sensor and the river: 2.4m
So I need some help with this question:
Do you know any sensor that works with this type of turbulence?
Attached are the measurements taken by the sensor in the river.
https://drive.google.com/open?id=1yIzH8 ... nL-iC8SwRi
Thanks. ;)

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: LEVEL MEASUREMENT FOR SENSOR MB7389

Post by libelium-dev » Fri Mar 09, 2018 11:55 am

Hi,

Ultrasound sensor can read distance between the sensor and the river but if there is turbulences the measure could be wrong due to reflections. Currently we don't have other sensor to read distance. Anyway, if you are interested a custom design, Libelium have a project department to development services. You could contact your sales agent or fill the Engineering Development Services form for more information.
https://www.libelium.com/contact/

Regards

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest