SMS reciving interraption

Questions about the Waspmote v15 and its modules
Post Reply
mikismart
Posts: 25
Joined: Thu Jul 11, 2019 8:33 am
Company: Samek Engineering

SMS reciving interraption

Post by mikismart » Wed Nov 27, 2019 7:54 am

Hello Libelium
I want to manage The 4G smart environment pro using receiving message from any device and to send all the reading data unless it is to be sleep mode who to do thus? :roll: :roll: :roll: :roll:

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: SMS reciving interraption

Post by libelium-dev » Wed Nov 27, 2019 11:23 am

Hi,

Is the node going to send data through SMS? You can use the example codes to receive and send SMS as a starting point to develop your code.
http://www.libelium.com/development/was ... nding-sms/
http://www.libelium.com/development/was ... iving-sms/

Regards

mikismart
Posts: 25
Joined: Thu Jul 11, 2019 8:33 am
Company: Samek Engineering

Re: SMS reciving interraption

Post by mikismart » Wed Nov 27, 2019 12:12 pm

I need to control the device to start or initialize when the sms is received.
you see I need to change this code environment
USB.println(F("4. Enter deep sleep..."));
PWR.deepSleep("00:01:00:00", RTC_OFFSET, RTC_ALM1_MODE1, ALL_OFF);
:roll: :roll: :roll:

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: SMS reciving interraption

Post by libelium-dev » Thu Nov 28, 2019 8:56 am

Hi,

We are sorry but it's not possible to wake Waspmote when an SMS is received. The 4G module can't cause an interruption to wake up Waspmote. You should check the SMS received continuously to do your development.

Regards

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest