Gas sensor ouput with GPS

[Nico Thx]

Hi Libelium,

We are working on a project where we want to use Waspmote + Gas board , data will be collected from different places at different altitudes in the same mission.
So, we need to have this kind of lines in the output from the waspmote board, uploaded regularly and locally on the SD card of the board:

Latitude Longitude Altitude Sensordata

- Is it possible to do that with a Waspmote ?
- In a second part, we want to send these data by Wifi as well
- And obviously how ? (if it needs a technical help from your service, at wich cost ?)

Many thanks for your great help
Regards (and happy new year !)
Nico

[libelium-dev]

Hi,

Yes, you can get that information with Libelium products. You can use a Gases PRO board, a GPS module and a WiFi module. You can check the complete information about these devices in the following links.
http://www.libelium.com/downloads/docum ... rd_pro.pdf
http://www.libelium.com/downloads/docum ... _guide.pdf
http://www.libelium.com/downloads/docum ... _guide.pdf

Regarding sending data, as you want to store it in the SD card, the file could be uploaded to an FTP server periodically. Or you could send data by an HTTP request to a server each time a measurement process is done and also store it on the SD card.

Libelium offers programming services in which we develop the full code according to the specifications and we advise on the best method to follow according to the development. Please ask your sales agent for more information.
https://www.libelium.com/contact/#sales-request

Regards

[Nico Thx]

Thanks for your answers and your help, I'll look at these files

[libelium-dev]

You're welcome!