Cloud Bridge Actility integration

Wireless communications in Waspmote, topologies, node types...
Post Reply
nguillou
Posts: 41
Joined: Wed Jun 05, 2019 9:58 am
Company: ANIAN

Cloud Bridge Actility integration

Post by nguillou » Fri Jun 21, 2019 4:59 am

Hi,

I recently had a cloud bridge subscription and intend to use it to bridge between devices connected to Actility LoRaWAN network server and cumulocity
I cannot see any associated device on cloud bridge ("You have not devices associated to this connector, select some devices to sync them."); it looks that traffic is not coming but I see from Actility wireless logger that Libelium Smart Water device frames are generated and send to the correct AS number
I am thinking something wrong with security key ; I have activated uplink/downlink security on Actility and entered a 32bytes key. On cloud bridge side, I have entered same key in the Encryption key (AES 256) field in the device configuration (Encryption keys)

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Cloud Bridge Actility integration

Post by libelium-dev » Fri Jun 21, 2019 8:10 am

Hi,

It seems that the data from Actility isn't received to The Bridge. Could you confirm that you performed the following steps to configure Actility?
http://www.libelium.com/downloads/docum ... df#page=12

Regards

nguillou
Posts: 41
Joined: Wed Jun 05, 2019 9:58 am
Company: ANIAN

Re: Cloud Bridge Actility integration

Post by nguillou » Thu Jun 27, 2019 11:19 am

Thanks,

Still not on. I just want to know if the encryption key entered on Actility side correspond to the Encryption key (AES 256)field in Libelium cloud bridge device? I am not sure because on Libelium side any character can be used as AES 256 bits key but the security key on Actility is only 128 bits Hexadecimal field called Tunnel interface authentication key

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Cloud Bridge Actility integration

Post by libelium-dev » Mon Jul 01, 2019 7:34 am

Hi,

Apologies for the delay answering. No, the Actility key doesn't correspond to the Libelium key. It isn't needed to configure the Libelium key in Actility.

Regards

nguillou
Posts: 41
Joined: Wed Jun 05, 2019 9:58 am
Company: ANIAN

Re: Cloud Bridge Actility integration

Post by nguillou » Mon Jul 01, 2019 8:04 am

Thanks but then where in cloud bridge to configure the security key that is setup in Actility?

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Cloud Bridge Actility integration

Post by libelium-dev » Mon Jul 01, 2019 10:17 am

Hi,

Apologies for the misunderstanding. You can configure the uplink/downlink security key in the Libelium Cloud following the next steps.
http://www.libelium.com/forum/libelium_ ... lity_1.png
http://www.libelium.com/forum/libelium_ ... lity_2.png

Regards

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest