Problems with Waspmote LoRaWAN and LoRa Gateway OS

Wireless communications in Waspmote, topologies, node types...
Post Reply
jjfernandez
Posts: 5
Joined: Thu Jul 25, 2019 12:25 pm
Company: ArcelorMittal

Problems with Waspmote LoRaWAN and LoRa Gateway OS

Post by jjfernandez » Fri Sep 27, 2019 10:09 am

Hi,

We have implemented a solution using Waspmote with LoRaWAN, and a gateway based on the LoRa Gateway OS. Our solution is working, and we receive the data as expected.

However, after some time in operation or several reboots, randomly, the data start to arrive corrupted and we don't know the reason. The "weird" part is that this is corrected with any of these two actions:
- Re-programm the Waspmote.
- Delete and create new application in the LoRa Gateway.

As it is solved with any of the previous mentioned solutions, we don't know where the problem comes from. Anyone had a similar situation or know where the problem can come from?

Thank you.

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Problems with Waspmote LoRaWAN and LoRa Gateway OS

Post by libelium-dev » Mon Sep 30, 2019 9:39 am

Hi,

What code did you upload to the node?

What API version did you use to upload the code?

Could you debug the issue through the serial monitor to check if the node is creating the frame properly?

Regards

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest