P&S v12 wind vane only gives values between 0-3

Post Reply
jak003
Posts: 5
Joined: Mon Aug 19, 2019 4:53 pm
Company: cobra groeninzicht

P&S v12 wind vane only gives values between 0-3

Post by jak003 » Tue Aug 20, 2019 8:28 am

Hi,

I have a Waspmote P&S smart agriculture v12 with soil moisture sensors, temperature/humidity sensors and a weather station.
All sensors seem to work well, except the wind vane of the weather station.
Regardless in which direction I hold it during the measurement, it gives me a value between 0 and 3 (where I would expect the values to go up to 16 different directions).

Is this a problem in my .pde script? I uploaded the code by using the api v023 and the ide v04.

Looking forward to your response.
Kind regards,

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: P&S v12 wind vane only gives values between 0-3

Post by libelium-dev » Tue Aug 20, 2019 9:17 am

Hi,

Please test the sensor downloading the last IDE version and testing with the vane example code.
http://www.libelium.com/development/was ... -filtered/

In any case, it seems a hardware issue of the sensor.

If you are interested to repair the sensor please fill the RMA form and we will contact you.

Regards

jak003
Posts: 5
Joined: Mon Aug 19, 2019 4:53 pm
Company: cobra groeninzicht

Re: P&S v12 wind vane only gives values between 0-3

Post by jak003 » Tue Aug 20, 2019 9:59 am

Hello,

I thought I used the latest IDE version for the Waspmote v12 (v04), according to this url: http://www.libelium.com/v12/development ... lications/.

Kind regards,

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: P&S v12 wind vane only gives values between 0-3

Post by libelium-dev » Tue Aug 20, 2019 11:16 am

Yes, that is the las IDE for v12 but the actual IDE should work also with that board and that sensor.

But as we already said it seems a hardware issue of the sensor, just to try.

Regards

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest