Conductivity sample code units inconsistent - pelase clarify

Post Reply
JessieP
Posts: 90
Joined: Fri May 27, 2016 2:39 pm

Conductivity sample code units inconsistent - pelase clarify

Post by JessieP » Thu Oct 26, 2017 2:39 pm

Please clarify as the documentation and sample code is inconsistent

http://www.libelium.com/development/was ... r-reading/

Is the output after the conversion in mill siemen's or micro siemens? The code says micro and the output says micro. We are calibrating the sensor and urgently need to know this! The documentation and code sample needs to be fixed link above, snip below

FROM DOCUMENTATION BELOW
{
.....
ECValue = ConductivitySensor.conductivityConversion(ECRes);
...
// Print of the results
USB.print(F(" Conductivity of the solution (uS/cm): "));
USB.println(ECValue);


}
Output-
H#
Conductivity Output Resistance: 776.4951171875 | Conductivity of the solution (mS/cm): 1587.4520263671

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Conductivity sample code units inconsistent - pelase clarify

Post by libelium-dev » Thu Oct 26, 2017 2:56 pm

Hi,

The value after the conversion is in micro siemens (uS/cm). We will update the documentation to fix this error.

Regards

JessieP
Posts: 90
Joined: Fri May 27, 2016 2:39 pm

Re: Conductivity sample code units inconsistent - pelase clarify

Post by JessieP » Thu Oct 26, 2017 5:50 pm

thank you!!!!! :lol: :) :) :)

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Conductivity sample code units inconsistent - pelase clarify

Post by libelium-dev » Fri Oct 27, 2017 8:36 am

You're welcome! :)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest