LIBELIUM WASPMOTE PLUG & SENSE! SMART ENVIRONMENT PRO KIT

Post Reply
reactore
Posts: 1
Joined: Tue Jun 12, 2018 6:29 am
Company: Reactore

LIBELIUM WASPMOTE PLUG & SENSE! SMART ENVIRONMENT PRO KIT

Post by reactore » Wed Jun 13, 2018 6:46 am

Hi there,

I want to use below solution and connect below sensors. Our requirement is to get the sensor data on our application. Can you please what are the possible ways of integration from third-party system with your solution? Also if possible can you please share some sample data which your system will be giving for below sensors.

CO2
CO
O2
CH4
Ultrasound
Temperature, Humidity and Pressure[/list][/list]

LIBELIUM WASPMOTE PLUG & SENSE! SMART ENVIRONMENT PRO KIT

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: LIBELIUM WASPMOTE PLUG & SENSE! SMART ENVIRONMENT PRO KIT

Post by libelium-dev » Wed Jun 13, 2018 8:49 am

Hi,

Yon can find here the example codes available for P&S Smart Environment PRO
http://www.libelium.com/development/was ... -pro-board

In addition, we recommend to take a look at the Gases PRO v30 Board Guide for more information about your device
http://www.libelium.com/downloads/docum ... rd_pro.pdf

About integration with a third-party system, we recommend send data to Meshlium which has a functionality to send data to many Clouds or synchronize data with a external data base.
http://www.libelium.com/downloads/docum ... df#page=68

Regards

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest