Waspmotes - Voltage and battery recharging readings

Post Reply
spasat
Posts: 53
Joined: Fri Jan 12, 2018 4:58 pm
Company: Beia Consult Intl

Waspmotes - Voltage and battery recharging readings

Post by spasat » Fri May 31, 2019 1:39 pm

Hello!

I am trying to read the following values for
- battery level
- battery voltage
- charging current

I am using the following code https://gist.github.com/pasatsanduadria ... 5d48f149c8

So basically the measurements are sent to a Meshlium device, and I looked also in the Meshlium sensor list and i observed that there is only one BATTERY sensor for the battery level.

Any idea how can I send to Meshlium the other two values = battery voltage and battery charging current?

Thank you

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Waspmotes - Voltage and battery recharging readings

Post by libelium-dev » Mon Jun 03, 2019 9:07 am

Hi,

In the frame lsit it's only defined the battery level field. You need to create a new sensor type, please take a look in the data frame guide in page 34 and 35.

Also if you want a quick turn around you can send the values as string.

Regards.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest