Unexpected error on Check Status

All related to the Kernel, packages system and libraries
Post Reply
mps
Posts: 6
Joined: Mon Feb 11, 2013 8:45 pm

Unexpected error on Check Status

Post by mps » Mon Mar 18, 2013 12:27 pm

Hi dev,

I when i do a Check Status under 802.15.4 in Sensor Networks, i get an error saying "Unexpected Error Please Try again"
I have tried a lot of times but it is the same.

In the tutorial mentioned here
http://www.libelium.com/development/wa ... tutorial/
in the third step it says to do Check status.

Please help me out.

thanks,
mps

siddagar
Posts: 3
Joined: Wed Mar 20, 2013 9:36 am

Re: Unexpected error on Check Status

Post by siddagar » Wed Mar 20, 2013 9:38 am

hi dev,

I have the same problem and been stuck on this for last 5 days.

Please do help me

Regards

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Unexpected error on Check Status

Post by libelium-dev » Thu Mar 21, 2013 10:19 am

Hello mps & siddagar

First we can check that Xbee on Meshlium work.

Connect to Meshlium via ssh and execute on terminal:

Code: Select all

ZigbeeScanD.sh stop
capturer S0 38400
After execute:

Code: Select all

+++
until response ok. If response ok, all right.

What version of Meshlium bought?


regards.

siddagar
Posts: 3
Joined: Wed Mar 20, 2013 9:36 am

Re: Unexpected error on Check Status

Post by siddagar » Thu Mar 21, 2013 6:11 pm

Hi dev,

I dont get any response on executing

Code: Select all

ZigbeeScanD.sh stop
capturer S0 38400
and then

Code: Select all

+++
The version is v.2.0.3
Serial Number: 12123085920326

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Unexpected error on Check Status

Post by libelium-dev » Fri Mar 22, 2013 8:45 am

Hello siddagar,

You bought a Meshlium without Xbee module, you can not use 802.15.4.

Best regards.

siddagar
Posts: 3
Joined: Wed Mar 20, 2013 9:36 am

Re: Unexpected error on Check Status

Post by siddagar » Fri Mar 22, 2013 10:56 am

Hi dev,

if Xbee wont work , then how can i communicate between Waspmote and Meshlium..


Regards

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Unexpected error on Check Status

Post by libelium-dev » Mon Mar 25, 2013 8:44 am

Hello siddagar,

You should contact with Technical Service to upgrade your Meshlium.

Best Regards.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest