Page 1 of 1

MeshLium operating system does not start

Posted: Thu Sep 15, 2016 2:50 am
by pablo_chumacero
Hi,

I have a Meshlium Zigbee GPRS-AP. I've used it for several months in a growing area, then I removed meshlium because he had already served their purpose. I did not use it a couple of weeks, but now I tried to turn on the operating system but does not start. I reached this conclusion because the system emits a just short beep and then does not emit the two long beeps. After about 1 minute a short beep sounds again, and so on. The short beep sounds several times but no wifi network is created and can not enter the System Manager. I wanted to know if there is any manual reset to factory settings, or any solution.

Re: MeshLium operating system does not start

Posted: Thu Sep 15, 2016 8:24 am
by libelium-dev
Hi pablo_chumacero,

It seems your Meshlium could have a hardware problem. Please, fill the RMA form and our tech support team will guide you in the next steps:
https://www.libelium.com/contact/#RMA

Best regards,