Unable to Login to Meshlium anymore

How to configure Meshlium or use the Manager System
libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Unable to Login to Meshlium anymore

Post by libelium-dev » Thu Jan 17, 2019 9:14 am

Hi,

Yes it is, the 0013A20041582088 number is the destination MAC address of the Xbee installed in the Meshlium. To check all the Xbee parameters of the module you should enter in the Manager System of the Meshlium and check them in Sensor Networks/RF Modules.

Regards.

dzabeuey
Posts: 36
Joined: Thu Aug 23, 2018 8:15 pm
Company: Ernst Young

Re: Unable to Login to Meshlium anymore

Post by dzabeuey » Tue Jan 22, 2019 11:16 am

Like i said previously, I don't have access to Mesh Manager bacause the user/password dont work anymore.

Now, a just want that you confirm the following question:

On the Waspmote, i got the "Destination MacAddress" and "Pan ID" informations. After i reboot the kit, i just need to use this two information to put/reconfigure the Meshlium (throung the Manager portal - RF Module) ?

Tks,

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Unable to Login to Meshlium anymore

Post by libelium-dev » Wed Jan 23, 2019 9:20 am

Hi,

Yes, after performing the rescue process you have to set that PANID in the Meshlium settings through the manager portal. The mac address is fixed for each module, so you don't have to configure it.

Regards

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest