Meshlium Transmission frequency

How to configure Meshlium or use the Manager System
Post Reply
martajg19
Posts: 89
Joined: Fri May 17, 2019 10:00 am
Company: JG Ingenieros

Meshlium Transmission frequency

Post by martajg19 » Mon May 20, 2019 1:35 pm

Hello, I have a meshlium 868LP and I've trying to find in the documentation its transmission frequency (both getting data from the plug&sense sensors and sending it to the cloud) but I haven't found it. So, I'd like to know the "reading" and transmission frequency (minutes?).
Thank you

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Meshlium Transmission frequency

Post by libelium-dev » Tue May 21, 2019 9:07 am

Hi,

What Cloud are you using to synchronize data? It depends on the Cloud used the synchronization intervals can be configurable. You can find more information in the section for each cloud connector.
http://www.libelium.com/downloads/docum ... _guide.pdf

Regards

martajg19
Posts: 89
Joined: Fri May 17, 2019 10:00 am
Company: JG Ingenieros

Re: Meshlium Transmission frequency

Post by martajg19 » Tue May 21, 2019 10:05 am

Mmmmm I'm using AWS but not sure about it. I may try a different one.

Thank you

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Meshlium Transmission frequency

Post by libelium-dev » Thu May 23, 2019 9:30 am

Hi,

The AWS cloud synchronises data every 60 seconds.

Regards

martajg19
Posts: 89
Joined: Fri May 17, 2019 10:00 am
Company: JG Ingenieros

Re: Meshlium Transmission frequency

Post by martajg19 » Thu May 23, 2019 9:41 am

thankyou again for your help! I still need to figure out how the AWS works exactly ;)

libelium-dev
Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: Meshlium Transmission frequency

Post by libelium-dev » Fri May 24, 2019 9:08 am

You're welcome! Don't hesitate to ask if you have any doubt.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest