Page 3 of 4

Re: Cumulocity Cloud Connection

Posted: Wed Jun 26, 2019 7:36 am
by libelium-dev
Hi,

We are sorry but we don't know how Cumulocity works. Anyway, we think that you can show data of each P&S selecting its node id. If you select a node id in the devices tab you can show its data in the statistics tab.

Regards

Re: Cumulocity Cloud Connection

Posted: Wed Jun 26, 2019 10:38 am
by martajg19
Hello, tahnkyou

Yes, the thing is they dont appear distinguished. This may have to do then with the meshlium. There, the all the P&S dont appear like this:

https://drive.google.com/file/d/1EwMs-K ... sp=sharing but all under the name WASP_MOTE, as if is all one node.

I guess thats why in the Cumulocity cloud I dont have them separately but like this:

https://drive.google.com/open?id=1JUsi3 ... 3za6brjtYY

Thankyou

Re: Cumulocity Cloud Connection

Posted: Thu Jun 27, 2019 7:41 am
by libelium-dev
Hi,

It seems that the Cumulocity connector only synchronized the MY_MOTE and node_id nodes. Please try to remove the nodes from Cumulocity, also please remove the Meshlium device and stop/start the synchronization of the Connector.

If you don't see the new devices please share the cumulocity.log file with us.

Regards

Re: Cumulocity Cloud Connection

Posted: Thu Jun 27, 2019 10:53 am
by martajg19
Ok. I'll try to reconnect again.
Here is how the sensors look in the meshlium sensor network, does it have something to do maybe?

https://drive.google.com/open?id=1XIZzZ ... bteKZGADsQ

And here the Cumulocity logs

https://drive.google.com/open?id=1Mhu7D ... -KU_IW5iSq

Thankyou

Re: Cumulocity Cloud Connection

Posted: Fri Jun 28, 2019 8:26 am
by libelium-dev
HI,

You shared other nodes in your previous message. Which of the following nodes are you trying to synchronize?
https://drive.google.com/file/d/1XIZzZ8 ... GADsQ/view
https://drive.google.com/file/d/1EwMs-K ... GjWNp/view

Did you try to remove them from Cumulocity and stop/start the synchronization? Does it work?

Regards

Re: Cumulocity Cloud Connection

Posted: Fri Jun 28, 2019 8:52 am
by martajg19
Hi, Im trying to synchronize the first link you copied (the other is a picture from your documentation...)

I'm trying it! Thankyou

Re: Cumulocity Cloud Connection

Posted: Fri Jun 28, 2019 11:45 am
by martajg19
So I removed the nodes and the meshlium but again they appear all together in the all devices section. Will try to disconnect and reconnect from Mehslium directly and see what happens...

Re: Cumulocity Cloud Connection

Posted: Fri Jun 28, 2019 1:13 pm
by martajg19
Sorry but same thing... I did strat/stop the cumulocity MQTT sender but nothing changed

Re: Cumulocity Cloud Connection

Posted: Mon Jul 01, 2019 8:21 am
by libelium-dev
Hi,

How many P&S do you have? Did you configure all of them with the same node id (MY_MOTE)? You need to configure different node id if you want that Meshlium and Cumulocity differentiate the nodes.

It seems that the other nodes (a, node_01, node_id) aren't synchronized since they are old, the last data was received in May.

Regards

Re: Cumulocity Cloud Connection

Posted: Mon Jul 01, 2019 8:55 am
by martajg19
Hi, yes. So I tried that on Friday but the SmartDeviceApp wasn't working properly (I had all 3 nodes under the same name since I did not specify any in the PCS and now I was trying to name each node). But will try againg today.

However, the nodes (a, node_01, node_id) aren't mine, you told me that these are yours, that you use them to make some tests...

Regards