New Parking Sensor with Radar Tech

Posts: 30
Joined: Tue Sep 18, 2018 10:04 pm
Company: Conure Telecom

Re: New Parking Sensor with Radar Tech

Post by jluengo83 » Tue Sep 24, 2019 8:46 pm


Thank you!

I got in touch with one of the tech via E-mail.

Quick question:

How do I check that the latest firmware is installed?

I have upgraded the firmware's sensor to 1.0.4 successfully "as per the message", but every time I load the data from node, below in the Radio Configuration section it shows "Firmware: 11".

I'm currently upgrading all the new sensors to the latest firmware 1.0.4 and I want to make sure that I can check that these sensors have the latest firmware installed when I load the data from node.

Let me know.


Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: New Parking Sensor with Radar Tech

Post by libelium-dev » Wed Sep 25, 2019 11:39 am


Please try to turn ON the node (restart it 3 times) and then try to read the information from the node again. It should change to version 13 corresponding to v1.0.4. The firmware value field isn't updated until the node executes the firmware for the first time.

The Smart Device App will be improved in the next version to show the firmware version in the vx.x.x format.


Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest