MeshLium operating system does not start

All related to the Kernel, packages system and libraries
Post Reply
Posts: 18
Joined: Sat Mar 19, 2016 12:58 am

MeshLium operating system does not start

Post by pablo_chumacero » Thu Sep 15, 2016 2:50 am


I have a Meshlium Zigbee GPRS-AP. I've used it for several months in a growing area, then I removed meshlium because he had already served their purpose. I did not use it a couple of weeks, but now I tried to turn on the operating system but does not start. I reached this conclusion because the system emits a just short beep and then does not emit the two long beeps. After about 1 minute a short beep sounds again, and so on. The short beep sounds several times but no wifi network is created and can not enter the System Manager. I wanted to know if there is any manual reset to factory settings, or any solution.

Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: MeshLium operating system does not start

Post by libelium-dev » Thu Sep 15, 2016 8:24 am

Hi pablo_chumacero,

It seems your Meshlium could have a hardware problem. Please, fill the RMA form and our tech support team will guide you in the next steps:

Best regards,

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest