PCS - Board Model - 4-20mA

Everything about programming the platform and using the Waspmote API
Post Reply
Posts: 8
Joined: Sun May 26, 2019 7:24 am
Company: ELEMENT

PCS - Board Model - 4-20mA

Post by element » Mon Aug 26, 2019 2:07 am


Using PCS, when selecting the Board Model '4-20 mA Current Loop' then uploading the binary into the P&S, the following logs are displayed with the title "Smart Agriculture PRO" and that can disturb anyone (when it is the first time I program a P&S)

Just for information.

- Smart Agriculture PRO -
- LoRaWAN switch ON OK
- LoRaWAN reset to factory values OK
- LoRaWAN device EUI set OK
- LoRaWAN device address set OK
- LoRaWAN network session key (NwkSKey) set OK
- LoRaWAN application session key (AppSKey) set OK
- LoRaWAN Adaptive Data Rate (ADR) configured OK
- LoRaWAN save configuration OK
- Frame buffer: 3C3D3E0618074EBC32C8913E9C4D595F4D4F5445230041055374617274
- Frame length: 29
- LoRaWAN join network OK
- LoRaWAN maximum payload: 51
- Tiny frame generated:000941055374617274
- LoRaWAN unconfirmed sending...
- LoRaWAN send packet OK
- LoRaWAN switch OFF OK

Posts: 27967
Joined: Mon Sep 28, 2009 1:06 pm

Re: PCS - Board Model - 4-20mA

Post by libelium-dev » Mon Aug 26, 2019 8:05 am


You're right but it is just a typing mistake in the 4-20mA code. Although it shows "Smart Agriculture PRO", the code reads 4-20mA sensors. We have just fixed the bug and the PCS will be updated as soon as possible.


Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest