Examples

» SW 05: Conductivity Sensor

Last edition: Aug 02nd, 2019 |

Turn on the Smart Water Board and reads the Conductivity sensor printing the result through the USB

» Ag xtr 24: Datasol Met sensor reading

Last edition: Jul 30th, 2019 |

Basic example that turns on, reads and turn off the sensor. Measured parameters are stored in the corresponding class variables and printed by the serial monitor.

» Waspmote factory default

Go to Example

Last edition: Jul 01st, 2019 |

This code sends basic parameters through the corresponding radio module.

» NB-IoT 23: scan operator

Go to Example

Last edition: May 22nd, 2019 |

This example shows how to scan network operators.

» NB-IoT 17: Sending HTTP GET

Go to Example

Last edition: May 22nd, 2019 |

This example shows how to use HTTPS requests to send Waspmote frames from Waspmote to Meshlium. Therefore, the Meshlium will be able to parse the sensor data and insert it into the database

» NB-IoT 16: GNSS

Go to Example

Last edition: May 22nd, 2019 |

This example shows how to use GNSS features

» 4G 08a: Send to Meshlium (HTTP)

Go to Example

Last edition: May 22nd, 2019 |

This example shows how to use HTTP requests to send Waspmote frames from Waspmote to Meshlium. Therefore, the Meshlium will be able to parse the sensor data and inset it into the database